Technical SpecificationsBenelli TnT 1130 (2007)
| Engine Engine type Bore x Stroke Displacement Valves Compression ratio Max Power Max Torque Fuel system Transmission Final drive Clutch Ignition type Starting system Lubrication Exhaust Spark plug Battery Gear ratios | Liquid cooled, 3-cylinders in line, 4-stroke, DOHC 88.0 x 62.0 mm 1130 cc Chain driven double head cam shaft, 4 valves per cylinder 11.5:1 139 hp (103.7 kW) @ 9250 rpm 117 Nm (86.3 ft. lbs) @ 6750 rpm Electronic injection with 1 injector per cylinder 6-speed Chain Wet, multi-plate Single coil inductive discharge electronic ignition Electric starter Wet sump 1st 14/39 2nd 18/35 3th 21/32 4th 23/30 5th 24/28 6th 25/27 |
| Dimensions Frame type Rake Overall length Overall width Overall height Wheelbase Seat height Ground clearance Dry weight Fuel capacity Colors Suspension (front) Suspension (rear) Tyre (front) Tyre (rear) Brake (front) Brake (rear) | mixed solution. Front ASD steel tube trellis, fastened with screws to boxed rear section, aluminium alloy castings Subframe: aluminium die-case 24° 2100 mm (82.7 inches) 790 mm (31.1 inches) 1050 mm (41.3 inches) 1443 mm (56.8 inches) 780 mm (30.7 inches) 199 kg 17 litres Marzocchi 50 mm diameter \'upside down\' fork adjustable in compression and rebound with spring pre-load ASD steel tube trellis swingarm with Extreme Technology single shock absorber with adjustable extension and spring load 120/70-R17 190/50-R17 Dual disc 320 mm with radial-mounted 4-piston calipers Single disc 240 mm with 2-piston calipers |
Picture: http://www.arpem.com